The full set for the ambient light installation consists of LED strip, capture card, power supply and two HDMI cables. The LED strips is attached to the TV with adhesive already on the strip. A high power USB C power supply can be used to power the device such as from a laptop (phone charger wil not work as we need at leas 65W charger). The LED strip is directional and has a start and end point. Place the LED strip clockwise around the back of the TV. The start needs to be connected to the LED-In of the device and the end of the LED strip to the LED-Out. The capture card is connected with the two usb cables to either one of the usb ports on the device (as shown on the schematic bellow). The video input is connected over the HDMI Input to the capture card. The capture card outputs then the signal to the TV and to the device simultaneously.

Comming soon… step-by-step installation video.